Boyne Valley Bowl, Grooved Ware
Boyne Valley Bowl, Grooved Ware
Boyne Valley Bowl, Grooved Ware
Boyne Valley Bowl, Grooved Ware
Boyne Valley Bowl, Grooved Ware

Boyne Valley Bowl, Grooved Ware

Shipping calculated at checkout.

Details

Grooved ware pottery is by far the most common pottery find at Brú Na Bóinne with 524 sherds being unearthed during an excavation of a circular wooden structure at Knowth between 1991 and 1993.

The design of this bowl, is based on sherds discovered during excavations in the Boyne Valley and, although no whole vessels have been discovered, the shear quantity of Grooved Ware finds have shown there to be a distinctive style to the pottery being produced in the area. With its flat bottom, straight sides and a prudent use of decoration, this bowl has been made in the Irish style of Grooved Ware style.   

 

Boyne Valley  

The rich lands of the Boyne valley have been attracting communities to settle and farm the land for at least 6000 years and it was these early communities that began the epic challenge of designing and constructing the complex passage tombs of Knowth, Newgrange and Dowth.  Erected around 3300 BC, the artistry and engineering skills required to build these passage tombs give us insight into the highly sophisticated society of these neolithic settlers, who probably took years to build each tomb. 

As well as being used as a burial chambers, it is believed that these tombs, like the numerous other monuments within the area, were used for ceremonies and rituals. The reconstructed tomb at Newgrange gives us a magical insight into one of the rituals that took place during the winter solstice.  As the sun rises on the morning of the winter solstice, a shaft of light enters the tomb through the roof box that sits above the entrance to the passage.  This golden light floods the length of the passage and illuminates the main chamber and its three alcoves.  This amazing event lasts for around 17 minutes each time it happens before the chamber begins to dim again for another year.  

Materials

Smoke fired Terracotta

Dimensions

Approx. 140 mm tall 282 mm diameter


Production

As with all my Museum Quality Replicas this pot has been made, as the original would have been,  entirely by hand from natural clay and using replicas of the types of tool that the Neolithic makers would have used.  In keeping with the original pot, the decoration has been applied using handmade bone  and antler tools

Health & Safety

This is a Museum Quality Replica and is not intended for use with food or drink, if you require replica pots for actual use with food of beverages, please ask before purchasing.

Firing

It has been fired to emulate the ancient firing conditions. The original pot would have been fired in an open wood fire, in close contact with the fuel, a process that leaves its mark on the clay as variations in the surface colour. However the very low temperatures achieved in open firings, also results in pots that are relatively weak, so this pot has been fired to a somewhat higher temperature to strengthen it, in a special firing process that allows me to achieve an authentic appearance to the pot. 

 

Postage
All items are sent using a second class postal service, if you wish to have an item sent first class please contact my for a quote. Many Thanks